Blazer Reassembly List

5/3/2020:

Got the transfer case and transmission crossmember bolted back in today. Pretty sure I don’t want to do that again anytime soon. Also reinstalled the transmission dipstick tube, which is held in place with a bellhousing bolt. Not sure what I think about GM engineers and their love of bellhousing bolts to hold wiring looms and other junk in place.

Things I’ve Forgotten or Need to be Addressed

• Top off front diff
• Torque front hubs (174 ft lbs)
• Adjust camber via upper control arms
• Check front brake caliper bolts
• Coil wiring
• Body mount washers
• Engine oil filter
• Rear brakes
• Bleed brake
• Auto shift linkage
• Transfer case shifter bracket
• Figure out accelerator return spring

Reassembly ToDo

• Trans cooler lines
• Auto shift linkage
• Transfer case shifter bracket
• Fill transfer case (Check fluid, should be Dexron)
• Transfer case shift linkage and shifter pivot bolt
• Speedometer cable
• Reinstall Driveshafts
• Exhaust pipe
• Replace body mounts (need to order more)
• Reinstall front bumper
• Fill Transmission
• Fill Engine oil